Cocobolo rosewood is one of my favorite woods, even though working with it makes me sneeze VIOLENTLY (a common reaction to rosewoods). This is a special piece and a special grade of cocobolo I am reserving for Black Zirconium orders ONLY. The colors in this wood can vary wildly from orange to red to purple and black. Every ring from this listing will be made from the same stock of high grade, figured cocobolo pictured. However, cocobolo is an extremely dynamic wood, and you can expect the colors to vary.

The metal in this listing is Black Zirconium-- Zirconium that is heat treated until it attains a very hard, durable black coating. The naturally silver colored metal is placed in a kiln at very high temperatures until the extreme heat causes oxidization. Just for full disclosure - the metal ring really is a very dark grey. I just don't want anyone to be disappointed. The ring pictured is a satin finish, but a polished finish is also available. The ring is also a beveled profile (vs. a flat or domed profile), which can also be changed. Just add the details you like in the appropriate section at checkout

Sizing

I highly recommend going to a jewelry counter to determine your size, even if you believe you already know your size. "Do it yourself" ring sizing methods (string, etc.) should absolutely not be trusted. Be sure to be measured using the width you plan to order.

NOTE ON WIDTH:
The minimum width for this style is 5mm. The maximum is 8mm.
Recommended width is calculated in this way: Size 5 is 5mm wide. Width increases .5mm per size above that. So:

Size 5- 5mm
Size 6- 5.5mm
Size 7- 6mm
Size 8- 6.5mm
Size 9- 7mm
Size 10- 7.5mm
Size 11+ - 8mm


************************************ IMPORTANT INFO ****************************************

****************************************************************************************************
****PLEASE PLEASE PLEASE BE 100% SURE OF YOUR SIZE BEFORE ORDERING *****
****************************************************************************************************

Zirconium lined wood rings can be adjusted up or down about 1/4 size (by removing or adding finish to the interior). Every ring is made to the exact size provided. An error in sizing that exceeds the margin provided above will necessitate a completely new ring. REFUNDS AND EXCHANGES WILL NOT BE POSSIBLE. BE 100% SURE OF YOUR ACCURATE AND CORRECT SIZE BEFORE ORDERING.

Each ring is given multiple coats of a hybrid epoxy finish, which is completely water-proof and soap proof. This protective coating is sanded up to 12,000 grit for an unbelievable, glass-like finish.

Shipping

All rings will ship via USPS Priority. Learn more about my shipping policy and international shipping.