Snakewood is a South American wood, named for the snakeskin pattern found on the heartwood. Like Desert Ironwood, Snakewood is incredibly hard and dense (more so than Ebony, for example). Because it is rare and because only the most figured part of the heartwood is exported, it is also one of the most expensive non-burl woods you can buy. The piece from which these rings are made is considered "exhibition" or "gallery" grade, the best of the best. I suggest a wider ring (8mm) for this wood, to best feature the figure. 

The outer portion of this ring is made of Cobalt - the most scratch resistant and shatterproof material I offer. Like titanium it is hypoallergenic and biocompatible. However, in many circumstances under which your Titanium ring might scratch, Cobalt will not. It is an alloy that is identical to Platinum in color, but it is an order of magnitude stronger. Cobalt offers nearly the scratch resistance of Tungsten Carbide, but unlike Tungsten, Cobalt will not shatter if dropped.

The ring pictured is a polished finish, but a satin finish is also available. The ring is also a flat profile (vs. a domed profile), which can also be changed. Just add the details you like at checkout. 

This is the first Cobalt ring with a wood interior ever offered.

Sizing

I highly recommend going to a jewelry counter to determine your size, even if you believe you already know your size. "Do it yourself" ring sizing methods (string, etc.) should absolutely not be trusted. Be sure to be measured using the width you plan to order.

NOTE ON WIDTH:
The minimum width for this style is 5mm. The maximum is 8mm.
Recommended width is calculated in this way: Size 5 is 5mm wide. Width increases .5mm per size above that. So:

Size 5- 5mm
Size 6- 5.5mm
Size 7- 6mm
Size 8- 6.5mm
Size 9- 7mm
Size 10- 7.5mm
Size 11+ - 8mm

************************************ IMPORTANT INFO ****************************************

****************************************************************************************************
****PLEASE PLEASE PLEASE BE 100% SURE OF YOUR SIZE BEFORE ORDERING *****
****************************************************************************************************

Cobalt lined wood rings can be adjusted up or down about 1/4 size (by removing or adding finish to the interior). Every ring is made to the exact size provided. An error in sizing that exceeds the margin provided above will necessitate a completely new ring. REFUNDS AND EXCHANGES WILL NOT BE POSSIBLE. BE 100% SURE OF YOUR ACCURATE AND CORRECT SIZE BEFORE ORDERING.

Each ring is given multiple coats of a hybrid epoxy finish, which is completely water-proof and soap proof. This protective coating is sanded up to 12,000 grit for an unbelievable, glass-like finish.

Shipping

All rings will ship via USPS Priority. Learn more about my shipping policy and international shipping.